PC CHIPS P49G (V1.0) Betriebsanweisung

Stöbern Sie online oder laden Sie Betriebsanweisung nach Motherboards PC CHIPS P49G (V1.0) herunter. PC CHIPS P49G (V1.0) Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 45
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
i
Motherboard User’s Guide
This publication, including photographs, illustrations and software, is under the
protection of international copyright laws, with all rights reserved. Neither this
user’s guide, nor any of the material contained herein, may be reproduced without
the express written consent of the manufacturer.
The information in this document is subject to change without notice. The manufac-
turer makes no representations or warranties with respect to the contents hereof
and specifically disclaims any implied warranties of merchantability or fitness for
any particular purpose. Further, the manufacturer reserves the right to revise this
publication and to make changes from time to time in the content hereof without
obligation of the manufacturer to notify any person of such revision or changes.
Trademarks
IBM, VGA, and PS/2 are registered trademarks of International Business Machines.
MMX, Pentium, Pentium-II, Pentium-III, Celeron are registered trademarks of
Intel Corporation.
Microsoft, MS-DOS and Windows XP/Vista/7 are registered trademarks of Microsoft
Corporation.
AMI is a trademark of American Megatrends Inc.
It has been acknowledged that other brands or product names in this manual are
trademarks or the properties of their respective owners.
Static Electricity Precautions
1. Don’t take this motherboard and components out of their original static-
proof package until you are ready to install them.
2. While installing, please wear a grounded wrist strap if possible. If you
don’t have a wrist strap, discharge static electricity by touching the bare
metal of the system chassis.
3. Carefully hold this motherboard by its edges. Do not touch those compo-
nents unless it is absolutely necessary. Put this motherboard on the top of
static-protection package with component side facing up while installing.
Pre-Installation Inspection
1. Inspect this motherboard whether there are any damages to components
and connectors on the board.
2. If you suspect this motherboard has been damaged, do not connect power
to the system. Contact your motherboard vendor about those damages.
Copyright © 2009
All Rights Reserved
P49G Series, V1.0
December 2009
Seitenansicht 0
1 2 3 4 5 6 ... 44 45

Inhaltsverzeichnis

Seite 1 - Pre-Installation Inspection

iMotherboard User’s GuideThis publication, including photographs, illustrations and software, is under theprotection of international copyright laws,

Seite 2 - Table of Contents

7Chapter 2: Motherboard InstallationI/O PortsThe illustration below shows a side view of the built-in I/O ports on themotherboard.PS/2 MouseUse the up

Seite 3

8Motherboard User’s GuideInstalling the ProcessorThis motherboard has a LGA775 socket for the latest Intel Core 2 Quad/Intel®CoreTM 2 Duo/Pentium® Dua

Seite 4 - Chapter 1 Introduction

9Chapter 2: Motherboard InstallationE. Close the load plate• Slightly push down the load plate ontothe tongue side, and hook the lever.• CPU is lock

Seite 5

10Motherboard User’s GuideMemory Module Installation ProcedureThese modules can be installed with up to 4 GB system memory. Refer to thefollowing to

Seite 6 - Chapter 1: Introduction

11Chapter 2: Motherboard InstallationTable A: DDR3 (memory module) QVL (Qualified Vendor List)The following DDR3 1333/1066memory modules have been tes

Seite 7 - Package Contents

12Motherboard User’s GuideType Size Vendor Module NameA-data AD3U1333B1G9-BHynix HMT112U6AFP8C-H9N0 AAKingMax FLFD45F-B8KG9 NAESMT8JTF12864AY-1G4D1MT

Seite 8

13Chapter 2: Motherboard InstallationJumper SettingsConnecting two pins with a jumper cap is SHORT; removing a jumper cap fromthese pins, OPEN.CLR_CMO

Seite 9 - Motherboard Components

14Motherboard User’s Guide1. Make sure the power supply provides enough SB5V voltage beforeselecting the SB5V function.2. To wake up the computer by U

Seite 10 - I/O Ports

15Chapter 2: Motherboard InstallationPin Signal Pin Signal1 HD_LED_P(+) 2 FP PWR/SLP(+)3 HD_LED_N(-) 4 FP PWR/SLP(-)5 RESET_ SW_ N( - ) 6 POWER_SW_P(

Seite 11 - Installing the Processor

16Motherboard User’s GuidePin Signal Pin Signal1VCC2Key3 NC 4 SignalConnecting Optional DevicesRefer to the following for information on connecting th

Seite 12 - Installing Memory Modules

iiMotherboard User’s GuideExit Without Saving ...36

Seite 13

17Chapter 2: Motherboard InstallationF_AUDIO: Front Panel Audio HeaderThis header allows the user to install auxiliary front-oriented microphone and l

Seite 14

18Motherboard User’s GuideInstall Other DevicesInstall and connect any other devices in the system following the steps below.IDE DevicesIDE devices in

Seite 15

19Chapter 2: Motherboard InstallationSerial ATA DevicesThe Serial ATA (Advanced Technology Attachment) is the standard interface forthe IDE hard drive

Seite 16 - Jumper Settings

20Motherboard User’s GuideFollow the steps below to install an PCI Express/CNR/PCI expansion card.1 Locate the PCI Express, CNR or PCI slots on the mo

Seite 17 - VCC Short Pins 1-2

21Chapter 3: BIOS Setup UtilityChapter 3 BIOS Setup UtilityIntroductionThe BIOS Setup Utility records settings and information of your computer, such

Seite 18

22Motherboard User’s GuideStandard CMOS Setup PageThis page displays a table of items defining basic information of your system.Primary IDE Master/Pri

Seite 19 - 3KEY4GDN

23Chapter 3: BIOS Setup Utility IDE DevicesfYour computer has one IDE channel which can be installed with one or two devices(Master and Slave). In

Seite 20

24Motherboard User’s GuideAdvanced Setup PageThis page sets up more advanced information about your system. Handle this pagewith caution. Any changes

Seite 21

25Chapter 3: BIOS Setup UtilityAPIC ModeThis item allows you to enable or disable the APIC (Advanced ProgrammableInterrupt Controller) mode. APIC prov

Seite 22 - Expansion Slots

26Motherboard User’s GuideAdvanced Chipset Setup PageThis page sets up more advanced chipset information about your system. Handlethis page with cauti

Seite 23

iiiMotherboard User’s Guide Start up problems during assembly...40

Seite 24 - Chapter 3 BIOS Setup Utility

27Chapter 3: BIOS Setup UtilityThis page sets up some parameters for peripheral devices connected to the system.CMOS Setup Utility – Copyright (C) 198

Seite 25 - Standard CMOS Setup Page

28Motherboard User’s GuidePower Management Setup PageThis page sets some parameters for system power management operation.ACPI Suspend TypeUse this it

Seite 26 - Chapter 3: BIOS Setup Utility

29Chapter 3: BIOS Setup UtilityPress <Esc> to return to the main menu setting page.This page sets up some parameters for devices installed on t

Seite 27 - Advanced Setup Page

30Motherboard User’s GuidePCI Health Status PageThis page helps you monitor the parameters for critical voltages, temperatures andfan speeds.CMOS Setu

Seite 28

31Chapter 3: BIOS Setup UtilityCMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. Sm

Seite 29 - Advanced Chipset Setup Page

32Motherboard User’s GuidePress <Esc> to return to the Smart Fan Function page.mnlk: Move Enter : Select+/-/: ValueF9: Load Default SettingsF1:

Seite 30 - Integrated Peripherals Page

33Chapter 3: BIOS Setup Utilitymnlk: Move Enter : Select+/-/: ValueF9: Load Default SettingsF1: General HelpF10: Save ESC: Exit OptionsNormal: auto

Seite 31 - Power Management Setup Page

34Motherboard User’s GuidePress <Esc> to return to the main menu setting page.CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends

Seite 32 - PCI / PnP Setup Page

35Chapter 3: BIOS Setup UtilityCPU FrequencyThis item indicates the current CPU frequency. Users can not make any change tothis item. Please noted tha

Seite 33 - PCI Health Status Page

36Motherboard User’s GuideSave & Exit SetupHighlight this item and press <Enter> to save the changes that you have made in theSetup Utility

Seite 34

1Chapter 1: IntroductionChapter 1 IntroductionLGA775 Socket Processor• Intel Core 2 Quad*/Intel® CoreTM 2 Duo/Pentium® Dual-Core/Celeron® Dual-Core/Ce

Seite 35

37Chapter 4: Software & ApplicationsChapter 4 Software & ApplicationsIntroductionThis chapter describes the contents of the support DVD-ROM/CD

Seite 36

38Motherboard User’s GuideThe Browse CD button is a standard Windows command that you can check thecontents of the disc with the Windows file browsing

Seite 37

39Chapter 4: Software & Applications3 The support software will automatically install.Once any of the installation procedures start, software is a

Seite 38 - Supervisor Password Page

Motherboard User’s Guide40StarStarStarStarStart up prt up prt up prt up prt up proboboboboblems during assemblems during assemblems during assemblems

Seite 39 - User Password Page

Chapter 6: Trouble Shooting Tips41c) The PC suddenly shuts down while booting up.1. The CPU may experience overheating so it will shutdown to protect

Seite 40 - Installing Support Software

Power Buon is pressed but PC fails to start. Yes Check if Power Supply Unit (PSU) is working No No Any Beep sound? No CLR CMOS and check if CPU 12

Seite 41

2Motherboard User’s GuideSerial ATA• Serial ATA Connector• Transfer rate exceeding best ATA (3.0 Gb/s) with scalability to hi

Seite 42 - Bundled Software Installation

3Chapter 1: IntroductionOnboard I/O Ports• Two PS/2 ports for mouse and keyboard• One VGA port• One LAN port• Four USB 2.0 ports• Audio jacks for micr

Seite 43

4Motherboard User’s GuidePackage ContentsYour motherboard package ships with the following items: The motherboard The User’s Guide Two Serial ATA c

Seite 44

5Chapter 2: Motherboard InstallationChapter 2 Motherboard InstallationTo install this motherboard in a system, please follow these instructions in th

Seite 45

6Motherboard User’s GuideMotherboard ComponentsLABEL COMPONENTS LGA775 socket for Intel Core 2 Quad/Intel® CoreTM 2 Duo/ Pentium® Dual-Core/Celeron® D

Kommentare zu diesen Handbüchern

Keine Kommentare