PC CHIPS M935DLU (V2.0) Bedienungsanleitung

This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved.

• Supporto delle impostazioni per la negoziazione automatica IEEE 802.3u • Supporto delle operazioni nella modalità Link Down Power Saving • Supp

LiSTA DE VERIFICACIÓN El paquete de su placa principal contiene los sigtes. ítems:  La placa principal  El Manual del Usuario  Un cable cinta p

Ethernet LAN Incorporado (optativo) • Soporta la operación de 10/100Mbps y de medio/full duplex • Conformidad IEEE 802.3/802.3u • Soporta la aut

Lista de verificação A embalagem da sua placa principal contém os seguintes itens:  A placa principal  O Manual do Utilizador  Um cabo para a un

• Jacks audio para microfone, line-in e line-out Ethernet LAN Integrada (opcional) • Suporta o funcionamento 10/100Mbps em half/full duplex • Co

检查单 您的主板包装含有以下项目：  主板  用户手册  一根磁盘驱动器扁平电缆（可选）  一根 IDE 驱动器扁平电缆  软件支持 CD 功能 处理器 支持 Socket-478 处理器 • PGA Socket 478 • 支持 Intel Pentium 4 系列 CPU

内建以太网 LAN （可选） • 支持 10/100Mbps 工作和半/全双工工作 • 符合 IEEE 802.3/802.3u 标准 • 支持 IEEE 802.3u 第 28 项的自协商 • 支持链路故障节电模式下操作 • 支持基线漂移 (BLW) 补偿 • 自适应均衡 USB

Chapter 1 Introduction This mainboard has a Socket-478 processor socket for Intel Pentium 4 processors with front-side bus (FSB) speeds up to 533 M

Key Features The key features of this mainboard include: Socket-478 Processor ♦ The PGA Socket 478 ♦ Supports Intel Pentium 4 series CPU ♦ Supp

♦ Supports RTC Alarm, Wake On Modem, AC97 Wake-Up and USB Wake-Up Onboard VGA ♦ Supports AGP V2.0 Compliant ♦ Supports AGP 4X/2X interface and Fa

Table of Contents Trademark ...I Static Electricity Precautions...

♦ Four back-panel USB2.0 ports and extra two USB2.0 ports (onboard USB connector JUSB1) ♦ Audio jacks for microphone, line-in and line-out Hardwar

Package Contents Your mainboard package contains the following items:  The mainboard  The User’s Manual  One diskette drive ribbon cable (opti

Chapter 2 Mainboard Installation To install this mainboard in a system, please follow the instructions in this chapter:  Identify the mainboard c

Mainboard Components Use the diagram below to identify the major components on the mainboard. Note: Any jumpers on your mainboard not appearing in

I/O Ports The illustration below shows a side view of the built-in I/O ports on the mainboard. (optional)(shared with READ1) PS/2 Mouse Use the up

Installing the Processor This mainboard has a Socket 478 processor socket. When choosing a processor, consider the performance requirements of the sy

Installing Memory Modules This mainboard accommodates two 184-pin 2.5V unbuffered Double Data Rate SDRAM (DDR SDRAM) Dual Inline Memory Module (DIMM

DIMM module in the correct direction. Match the cutout on the DIMM module with the notch on the DIMM socket. 3. Install the DIMM module into the so

Install the Mainboard Install the mainboard in a system chassis (case). The board is a Micro ATX size mainboard. You can install this mainboard in an

Connecting Optional Devices Refer to the following for information on connecting the mainboard’s optional devices: 1 1READ1AUDIO2 JUSB1 1 11 S

Static Electricity Precautions Components on this mainboard can be damaged by static electricity. Take the following precautions when unpacking the

JUSB1: Front panel USB Connector The mainboard has USB ports installed on the rear edge I/O port array. Additionally, some computer cases have USB p

Please check the pin assignment of the cable and the USB header on the mainboard. Make sure the pin assignment will match before plugging in

Install Other Devices Install and connect other devices in the system as steps below. FLOPPYIDE2IDE11 1 1 Floppy Disk Drive The mainboard ships

Install the device(s) and connect power from the system power supply. Use the cable provided to connect the device(s) to the Primary IDE channel conn

Expansion Slots This mainboard has one AGP, one CNR and two 32-bit PCI slots. AGP1CNR1 PCI2PCI1 Follow the steps below to install one AGP/C

Chapter 3 BIOS Setup Utility Introduction The BIOS Setup Utility records settings and information about your computer such as the date and time, the

Running the Setup Utility Each time your computer starts, before the operating system loads, a message appears on the screen that prompts you to “Hit

Standard CMOS Setup Page Use this page to set basic information such as the date, the time, the IDE devices, and the diskette drives. If you press th

Floppy Drive A Floppy Drive B Use these items to set the size and capacity of the floppy diskette drive(s) installed in the system. Advanced Setup P

Try Other Boot Device If you enable this item, the system will also search for other boot devices if it fails to find an operating system from the fi

Notice: 1. Owing to Microsoft’s certifying schedule is various to every supplier, we might have some drivers not certified yet by Micros

System BIOS Cacheable If you enable this item, a segment of the system BIOS will be copied to main memory for faster execution. Share Memory Size Th

Auto Detect DIMM/PCI Clk When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots. Spread Spectrum If you enable spread

Power Management Use this item to select a power management scheme. Both APM and ACPI are supported. Suspend Time Out This sets the timeout for Susp

PCI / Plug and Play Setup Page This page sets some of the parameters for devices installed on the PCI bus and devices that use the system plug and pl

Load Optimal Settings If you select this item and press Enter a dialog box appears. If you press Y, and then Enter, the Setup Utility loads a set of

OnBoard FDC Use this item to enable or disable the onboard floppy disk drive interface. OnBoard Serial Port Use these items to enable or disable the

USB Function for DOS Enable this item if you plan to use the USB ports on this mainboard in a DOS environment. ThumbDrive for DOS Enable this item t

Hardware Monitor Page This page sets some of the parameters for the hardware monitoring function of this mainboard. AMIBIOS SETUP – HARDWARE MONITOR

at start-up, depending on the setting of the Password Check item in Advanced Setup. Change or Remove the Password Highlight this item, press Enter

Chapter 4 Software & Applications Introduction This chapter describes the contents of the support CD-ROM that comes with the mainboard package

Features & Checklist Translations Liste de contrôle Le coffret de votre carte mère contient les éléments suivants :  La carte mère  Le Manuel

Installing Support Software 1.Insert the support CD-ROM disc in the CD-ROM drive. 2.When you insert the CD-ROM disc in the system CD-ROM drive,

Auto-Installing under Windows 98/ME/2000/XP If you are under Windows 98/ME/2000/XP, please click the Setup button to run the software auto-installin

Installing under Windows NT or Manual Installation If you are under Windows NT, the auto-installing program doesn’t work out; or you have to do the m

• Quatre ports USB2.0 de panneau arrière et deux ports USB2.0 supplémentaires (Prise USB interne JUSB1) • Prises audio pour microphone, ligne d’ent

Checkliste Die Verpackung Ihres Mainboards enthält folgende Teile:  Mainboard  Handbuch  Bandkabel für Floppylaufwerke (optional)  Bandkabel für

• Audioanschlüsse für Mikrofon, line-in und line-out IIntegriertes Ethernet LAN (optional) • Unterstützt Betrieb mit 10/100 MB/Sek. sowie Halb-/Vo

Lista L’imballo della scheda madre é composto da:  La scheda madre  Il manuale  Una piattina per il collegamento dei drive (opzionale)  Una piat